Bass hooks

Jig Rig™ is the ultimate for fishing soft plastic baits along the bottom. The slim-profile weight, with bait in tow, drops straight down, penetrating vegetation until you feel it hit bottom. Then, as you slowly retrieve the snagless rig over bottom contours, your bait, rigged on a hook that pivots independent of the weight, freely moves about, tantalizing even the most wary bass. With the weight leading the way, the compact profile of this rig allows for longer, more accurate casts. Weights can easily be removed and added to the split ring without re-tying line or re-rigging bait. Perfect for Texas Rig'N, the light wire hook (Attached to a solid ring) features an extra wide gap, Z-lock shoulder bend, Super Needle Point, and Black Chrome finish. Rig is available with either a lead or tungsten weight attached. Owner's Yuki Bug is a perfect bait for the Jig Rig™.

The Twistlock Flipping Hook is a revolutionary new flipping hook. While traditional flipping hooks have straight shanks and tedious methods of securing bait heads to the shank, the TFH takes this category to a whole new level. With the patent pending CPS (Centering Pin Spring), baits can be rigged quickly and perfectly straight with no extra modifications needed, and the CPS holding power is second to none. This hook also features Owner's new Zo WireT, that is significantly stronger than other traditional high carbon steel wires and will hold up with the largest of braided lines and the biggest of fish. This means smaller hook wire diameters for better penetration and the strongest of hook points that will not roll over or dull. Also featured on this hook is Owner's new Silky Gray frictionless finish with "Teflon" like properties that allow superior hook penetration and added help with bait clearance upon hooksets.

The weighted version not only helps sink or "swim" a rigged bait down into the strike zone, but helps to increase casting distance. The weight is positioned low on the shank to provide a keel" effect so that baits rigged weedless-style will swim naturally (as opposed to rolling or flipping when weights are inserted inside soft baits). The weighted version is ideal for Swimming Senkos, swimbaits, flukes and other small profile plastics. With Owner's unique "Centering-Pin Spring" (CPS - patent pending) attached to the hook eye, baits can be "permanently" secured by inserting the pin in the center of the nose of a soft plastic, which can then be screwed onto the TwistLOCKT coil spring so that any bait will rig perfectly everytime! The "Open" gap allows for more positive hook sets. Features include a 30° eye-bend, an X-strong forged shank, Super Needle Point, and black Chrome finish.

The Twistlock Finesse hook is practically weightless and give sticky sharp a whole new meaning. With the Centering Pin Spring (CPS - patent pending) baits can be rigged quickly and perfectly straight every time. This hook is perfect for finesse style baits on lines up to 8 lbs. The bend and shank of this finesse hook acts like a keel to keep small and light baits perfectly balanced. Other Features include Super Needle Point, and black chrome finish.

FLASHY SWIMMER with Owner's TwistLOCK Centering-Pin Spring (CPS-patent pending) is a unique setup for rigging soft swimbaits, flukes, and other swimming plastics. The spinner blade is attached to a non-moveable weight that keels a rigged soft plastic perfectly for use as an ideal "search" bait. In lieu of spinnerbaits or crankbaits, the flashy swimmer can be used as an alternative to cover a lot of water in a short time. A multitude of presentations can be achieved by switching baits and the speed of retrieval. The added weight helps sink or "swim" the rigged bait down into the strike zone, while the blade adds a fish-attracting flash. The wire pivots where attached to the weight, but the design of the molded lead keeps the wire and blade riding horizontal during a steady retrieve. Attached to the wire is a #3 hammered nickel-finished willowleaf blade, rigged with a dual mini swivel. Other features include a TwistLOCK "Centering-Pin Spring" (CPS-patent pending) attached to the hook eye, an "open" gap for more positive hook sets, a XX-strong forged shank, Super Needle Point, and black chrome finish.

BeastT Hooks with TwistLOCK® Centering-Pin Spring (CPS) are designed for weedless-style rigging of larger plastics like big swimbaits, flukes, tubes and creature baits. With its TwistLOCK® Centering-Pin Spring (CPS - patent pending) attached to the hook eye, baits can be permanently secured by inserting the pin in the center of the nose of a soft plastic, which can then be screwed onto the TwistLOCK® coil spring to rig perfect everytime! Different Size springs are matched to hook size to maximize holding power. Quick-drop shank below eye allows for rigging fat-headed baits, and maximum gap allows for improved hook sets because of better bait clearance. The non-movable weight attached (5130W) not only helps to sink or swim a rigged bait down into the strike zone, but because the weight is positioned so low on the shank, it provides a keel effect. As a result, when rigging large swimbaits weedless-style, plastics swim naturally (as opposed to rolling or flipping where weights are inserted inside soft baits). Ideal for both fresh and saltwater fishing, features include a TwistLOCK® Centering-Pin Spring (CPS - patent pending) attached to the hook eye, maximum gap, a XXX-strong forged shank, Super Needle Point, and black chrome finish.

This unweighted version has all the features of the Weighted Beast less the weight. The unweighted version is ideal for lighter baits than do not need large amounts of weight to be swam. Due the XXX-strong wire and big gap angle there is a lot of steel in this hook which allows the hook alone to act as the weight on lighter baits. "Clip-On" weights can always be added to the shank to increase the hook's weight.

This bass hook is Unique with its TwistLOCK™ Centering-Pin Spring (Patented) attached to the hook eye. Baits can be permanently secured by inserting the pin in the center of the nose of a soft plastic, which can then be twisted (screwed) onto the TwistLOCK™ coil spring so that any bait will rig perfectly everytime! The hook'sopen gap allows for more positive and effective hook sets. Ideal for weedless-style Carolina Rig'n and Texas Rig'n of big tube baits and beefy soft plastics. Features include a 30°eye-bend, XXX-strong forged shank, Super Needle Point, and black chrome finish.

This Weighted Twistlock™ hook employs the same hook as the 5132 Twistlock™, but also features a non-movable weight attached to the shank. Designed for both fresh and saltwater fishing. The hook's added weight helps to sink or swim the bait into the strike zone. With its Twistlock™ Centering-Pin-Springâ (CPS Patened), baits can be permanently secured by inserting the pin in the center of a soft plastic, which can then be screwed on the Twistlock™ coil spring to rig perfectly everytime! Ideal for weedless style fishing without having to add a separate weight. Great for skipping or pitching into deep cover. Open gap allows for more positive hook sets. Features include a 30° eye-bend, XXX-strong forged shank, Super Needle Point, and black chrome finish.

This hook features Owner's unique TwistLOCK™ Spring-On-Shank (SOS- patent pending) attached to the hook's eye for incredible non-slip bait-holding power when fished in grass for hard-hitting bass. Perfect for weedless-style Carolina or Texas Rig'n. The nose of the worm is permanently secured by screwing it onto the TwistLOCK™ coil spring before the final positioning of the hook point. Hook's open gap with parallel point allows for more positive and effective hook sets. Features include a standard, all-purpose forged wire shank, Super Needle Point, and black chrome finish.

This worm hook is extra strong for rigging bigger baits and features Owner's unique TwistLOCK™ Spring-On-Shank (SOS patent pending) attached to the hook's eye for incredible non-slip bait-holding power. Ideal for weedless-style Carolina or Texas Rig'n, the nose of the bait can be permanently secured by twisting it onto the coil spring before positioning the hook point. Hook's open gap and upright point allows for more positive hook sets. Features include a XXX-strong, forged shank, Cutting Point®, and black chrome finish.

Straight Shank worm hooks, ideal for split-shotting plastic worms for wary bass. Features include a round bend, Cutting Point™, black chrome finish and baitholder slices on the inside of the straight shank.

Straight Shank, Wide Gap worm hooks for flipping and pitching large baits and setting the hook on big bass. Features include a round bend, Cutting Point®, black chrome finish, baitholder slices on the inside of the straight shank, and they're XXX strong.

Offset worm hooks, with a worm-holding 90 degree bend shoulder. Preferred by many anglers for straight and easy rigging of plastic worms. Features include Cutting Point® and black chrome finish.

Offset Shank, Wide Gap worm hooks with worm-holding 90° bend shoulder. Extra wide gap bend and heavy-duty XX strong shank for rigging big baits and hauling bass from heavy cover. Ideal for jerk baits. Features include Cutting Point® and available in Black Chrome and Red finishes.

RIG˜N™ HOOKS, engineered for Carolina Rig˜n, Texas Rig'n and Split Shot'n, ride with the point upright in an optimum striking position. Features include a short shank, huge wide bite with open gap, Cutting Point® and black chrome finish.

J Hooks, with an extra wide bend, is perfect for Carolina and Texas rigging lizards and other larger soft plastic baits. Point surfaces quicker on hook sets, and wide bend reduces the chance of fish throwing the hook. Features include a worm-holding Z-Lock shoulder bend, Cutting Point® and black chrome finish.

Wide Gap Plus™, with its deep throat and dramatically elevated point, offers an extraordinary wide gap for extra hooking power. The plus point rides above the eye, providing a more positive and effective hook set. Ideal for weedless style Carolina Rig'N and Texas Rig'N of big tube baits and extra beefy soft plastic. Features include a XXX-strong forged shank, a bait-holding Z-Lock shoulder bend, Cutting Point®, and black chrome finish.

Z-Neck™, Offset worm hooks, with a radical Z-Lock shoulder bend, keep rigged soft plastics in place, while an extra wide gap accommodates bigger baits and offers greater hooking power. Features include a round bend, Super Needle Point and black matte finish.