Beast™ Hooks with TwistLOCK® Centering-Pin Spring (CPS) are designed for weedless-style rigging of larger plastics like big swimbaits, flukes, tubes and creature baits. With its TwistLOCK® Centering-Pin Spring (CPS - patent pending) attached to the hook eye, baits can be permanently secured by inserting the pin in the center of the nose of a soft plastic, which can then be screwed onto the TwistLOCK® coil spring to rig perfect everytime! Different Size springs are matched to hook size to maximize holding power. Quick-drop shank below eye allows for rigging fat-headed baits, and maximum gap allows for improved hook sets because of better bait clearance. The non-movable weight attached (5130W) not only helps to sink or swim a rigged bait down into the strike zone, but because the weight is positioned so low on the shank, it provides a keel effect. As a result, when rigging large swimbaits weedless-style, plastics swim naturally (as opposed to rolling or flipping where weights are inserted inside soft baits). Ideal for both fresh and saltwater fishing, features include a TwistLOCK® Centering-Pin Spring (CPS - patent pending) attached to the hook eye, maximum gap, a XXX-strong forged shank, Super Needle Point, and black chrome finish.

This unweighted version has all the features of the Weighted Beast less the weight. The unweighted version is ideal for lighter baits than do not need large amounts of weight to be swam. Due the XXX-strong wire and big gap angle there is a lot of steel in this hook which allows the hook alone to act as the weight on lighter baits. "Clip-On" weights can always be added to the shank to increase the hook's weight.

This is the ultimate stinger harness rig, designed for use with both soft plastic and natural baits to eliminate short strikes and improve hookup ratio. Available in two models, each rig features a length of super tough 80-lb. braided line, terminating at one end with a large loop and at the other with our EZ-Snap (dual interlocking), to which is attached an Owner ST-36 Treble hook. Simply pass the loop through the eye of any swimbaitbait hook, then pass the treble through the loop and cinch the rig down against the eye for either a top side or under side rigging of the bait. The snap allows for a convenient change of treble hook sizes. Shown above is the 5130W Weighted Beast™ Hook which is the perfect hook to pair up with the Stinger Harness Rig.

This bass hook is Unique with its TwistLOCK™ “Centering-Pin Spring” (CPS – patent pending) attached to the hook eye. Baits can be “permanently” secured by inserting the pin in the center of the nose of a soft plastic, which can then be twisted (screwed) onto the TwistLOCK™ coil spring so that any bait will rig perfectly everytime! Hook’s “open “ gap allows for more positive and effective hook sets. Ideal for weedless-style Carolina Rig’n and Texas Rig’n of big tube baits and beefy soft plastics. Features include a 30°eye-bend, XXX-strong forged shank, Super Needle Point, and black chrome finish.

This Weighted Twistlock™ hook employs the same hook as the 5132 Twistlock™, but also features a non-movable weight attached to the shank. Designed for both fresh and saltwater fishing. The hook’s added weight helps to sink or “swim” the bait into the strike zone. With its Twistlock™ “Centering-Pin-Spring” (CPS – patent pending), baits can be “permanently” secured by inserting the pin in the center of a soft plastic, which can then be screwed on the Twistlock™ coil spring to rig perfectly everytime! Ideal for weedless style fishing without having to add a separate weight. Great for skipping or pitching into deep cover. “Open” gap allows for more positive hook sets. Features include a 30° eye-bend, XXX-strong forged shank, Super Needle Point, and black chrome finish.

This hook features Owner’s unique TwistLOCK™ “Spring-On-Shank” (SOS- patent pending) attached to the hook’s eye for incredible “non-slip” bait-holding power when fished in grass for hard-hitting bass. Perfect for weedless-style Carolina or Texas Rig’n. The nose of the worm is “permanently” secured by screwing it onto the TwistLOCK™ coil spring before the final positioning of the hook point. Hook’s “open” gap with parallel point allows for more positive and effective hook sets. Features include a standard, all-purpose forged wire shank, Super Needle Point, and black chrome finish.

This worm hook is extra strong for rigging bigger baits and features Owner’s unique TwistLOCK™ “Spring-On-Shank” (SOS – patent pending) attached to the hook’s eye for incredible “non-slip” bait-holding power. Ideal for weedless-style Carolina or Texas Rig’n, the nose of the bait can be “permanently” secured by twisting it onto the coil spring before positioning the hook point. Hook’s “open” gap and upright point allows for more positive hook sets. Features include a XXX-strong, forged shank, Cutting Point®, and black chrome finish.

Straight Shank worm hooks, ideal for split-shotting plastic worms for wary bass. Features include a round bend, Cutting Point™, black chrome finish and baitholder slices on the inside of the straight shank.

Straight Shank, Wide Gap worm hooks for flipping and pitching large baits and setting the hook on big bass. Features include a round bend, Cutting Point®, black chrome finish, baitholder slices on the inside of the straight shank, and they're XXX strong.

Offset worm hooks, with a worm-holding 90 degree bend shoulder. Preferred by many anglers for straight and easy rigging of plastic worms. Features include Cutting Point™ and black chrome finish.

Offset Shank, Wide Gap worm hooks with worm-holding 90° bend shoulder. Extra wide gap bend and heavy-duty XX strong shank for rigging big baits and hauling bass from heavy cover. Ideal for jerk baits. Features include Cutting Point® and available in Black Chrome and Red finishes.

RIG ‘N™ HOOKS, engineered for Carolina Rig‘N, Texas Rig‘N and Split Shot‘N, ride with the point upright in an optimum striking position. Features include a short shank, huge wide bite with open gap, Cutting Point® and black chrome finish.

“J” Hooks, with an extra wide bend, is perfect for Carolina and Texas rigging lizards and other larger soft plastic baits. Point surfaces quicker on hook sets, and wide bend reduces the chance of fish throwing the hook. Features include a worm-holding Z-Lock shoulder bend, Cutting Point® and black chrome finish.

Long Neck Worm Hooks are the ideal choice for rigging popular "stretch" baits, as well as soft plastic worms. The unique "barb" protruding from behind the hook's eye keeps rigged soft baits attached, while the exclusive flexible "stopper" can be adjusted along the hook's shank to rest against the bait and securely hold it in a pre-strike position. Perfect for weedless-style Carolina or Texas riggin', where the hook's "open" gap allows for more positive and effective hook sets. Features include an X-Strong, all purpose shank, Cutting Point, and black chrome finish.